possible reason is that the field symbol <result_field> dont have any values that will cause dump. Better to Debug first and check if <result_field> is assign before using.. Hope it helps.
Re: GETWA_NOT_ASSIGNED Field symbol has not yet been assigned.
↧
↧
Re: Visual basic error when installing EPM
Hi Robert,
Do you have .net installed?
3.5 needed for 32 bit
4.0 needed for 64 bit
Of EPM add on.
Andy
↧
With introduction to Simple Finance and Simple Logistics how beneficial it is to learn SAP HANA + Finance or HANA + MM ?
Will learning HANA and with either MM or Finance will help getting better job opportunity in the future as HANA is introduced with sFin and Logistics ?
↧
Re: Deep Structure field in Read --Key Condition
Yes Mathew,
Already you have answered for the discussion.
You have to do it in two reads. First read the outer table, then the inner one.
I didn't suggest ASSIGN component way to use it. I mentioned another way also available just like information.
You can use Assign statement also to read the deep structure values as shown below.
Regards
Rajkumar Narasimman
↧
BOM-Preference
Dear GTS Experts,
After checking in Google and SCN I Am posting my question here .
I am new to GTS, presently I have to upload BOM to GTS with preference process.
But I am confused to understand the Settings for BOM-Preference
Could you please explain me the steps involved here..
In my case Vendor declaration also will be included as sub items are from different countries
Please give me guidance how to configure
I have found one link but it tells development also required.
http://help.sap.com/saphelp_gts101/helpdata/en/4c/7a2f409bc971d0e10000000a15822b/frameset.htm
↧
↧
Re: RFC error system SID nr 02 function 'SUBST_START_REPORT_IN_BATCH' f
Hi Srinivas.
I think you can stop the upgrade, Do the full system restart and then try again in the same phase.
Could you share the full sapup logs as attachment
Regards
SS
↧
Re: Minimizing SAP B1 Database Size
That is a good idea too Frank, the data archive functionality.
Depending on the RPO, the Simple recovery model may not be suitable.
Best that Suresh determines with the customer.
Kind Regards,
Nick Lakasas
↧
SAP FI & CO
Dear Respected members
First of all thank you very much for your great blogs and advises on this forum . I'm currently working in A/P section FI module since 1.7 years and really interested to go more deeper and learn SAP . I would like to take FI & CO certification, & have downloaded course from various sites . recently I contacted some individuals thru add for training and have luckily found one from India . is it vise to take training from them and study the course parallel and to get IDES access as well to practice more freely . what is the Certification process for FI & CO , can anyone please list me kown the steps so I can follow as many of you are already certified .
Thanks and appreciate your Swift reply.
All the best .
Hasnain.
↧
Unable to hide fiori launchpad search field from custom SAP UI5 app
Hi,
i have deployed a custom sapui5 application on to fiori launchpad.
In my application, I have written below code to hide the launch pad search bar.
var objShell = sap.ui.getCore().byId("shell");
objShell.setSearchVisible(false);
Above code is executing but still the search bar is visible. Below is the screen shot of objShell properties at run time.
I am not why setSearchVisible() method is not working.
Please guide.
↧
↧
Re: RFC error system SID nr 02 function 'SUBST_START_REPORT_IN_BATCH' f
Hi Sriram,
Thanks for reply, Wish you a happy and prosperous New Year!
I am trying to set parameter in instance profile and start upgrade
DIR_EXECUTABLE = /usr/sap/<SID> /SYS/exe/run
I have attached SAPup and phase log details
SApup:
AIN_SHDRUN/JOB_RUTTTYPSET
# Using phase log file 'PUTTTYPSET.LOG'.
...checking parallel status at 20160101123228 for MAIN_SHDRUN/JOB_RUTTTYPSET
# Using phase log file 'PUTTTYPSET.LOG'.
...checking parallel status at 20160101123234 for MAIN_SHDRUN/JOB_RUTTTYPSET
# Using phase log file 'PUTTTYPSET.LOG'.
...checking parallel status at 20160101123238 for MAIN_SHDRUN/JOB_RUTTTYPSET
# Using phase log file 'PUTTTYPSET.LOG'.
...checking parallel status at 20160101123244 for MAIN_SHDRUN/JOB_RUTTTYPSET
# Using phase log file 'PUTTTYPSET.LOG'.
...checking parallel status at 20160101123248 for MAIN_SHDRUN/JOB_RUTTTYPSET
# Using phase log file 'PUTTTYPSET.LOG'.
...checking parallel status at 20160101123255 for MAIN_SHDRUN/JOB_RUTTTYPSET
# Using phase log file 'PUTTTYPSET.LOG'.
...checking parallel status at 20160101123258 for MAIN_SHDRUN/JOB_RUTTTYPSET
# Using phase log file 'PUTTTYPSET.LOG'.
...checking parallel status at 20160101123305 for MAIN_SHDRUN/JOB_RUTTTYPSET
# Using phase log file 'PUTTTYPSET.LOG'.
...checking parallel status at 20160101123308 for MAIN_SHDRUN/JOB_RUTTTYPSET
# Using phase log file 'PUTTTYPSET.LOG'.
...checking parallel status at 20160101123315 for MAIN_SHDRUN/JOB_RUTTTYPSET
# Using phase log file 'PUTTTYPSET.LOG'.
...checking parallel status at 20160101123318 for MAIN_SHDRUN/JOB_RUTTTYPSET
# Using phase log file 'PUTTTYPSET.LOG'.
...checking parallel status at 20160101123325 for MAIN_SHDRUN/JOB_RUTTTYPSET
# Using phase log file 'PUTTTYPSET.LOG'.
...checking parallel status at 20160101123328 for MAIN_SHDRUN/JOB_RUTTTYPSET
# Using phase log file 'PUTTTYPSET.LOG'.
...checking parallel status at 20160101123335 for MAIN_SHDRUN/JOB_RUTTTYPSET
# Using phase log file 'PUTTTYPSET.LOG'.
..times self: 0.000/0.000 usr/sys, children 0.000/0.000 usr/sys.
CURRENTPHASE MAIN_SHDRUN/JOB_RUTTTYPSET
...started at 20160101123335
# Using phase log file 'PUTTTYPSET.LOG'.
..times self: 0.250/0.030 usr/sys, children 0.000/0.000 usr/sys.
..finished at 20160101123336 with status SUCCEEDED.
# Phase(s) MAIN_SHDRUN/SUBMOD_PREP_DDIC_740/JOB_RSHDB_NT_CHK...JOB_RUTREMINDX (4) skipped due to condition(s) 'ST_range=*-739'.
# Phase(s) MAIN_SHDRUN/SUBMOD_MIG_SMIGR/JOB_RSUPGPRPSMIGR...RUN_FULL_CACHE_RESET (5) skipped due to condition(s) 'MIGRATE_SECONDDB'.
# Phase SETUPGPAR_ISU_MAX_TAB_SIZE skipped due to condition(s) 'ITERATIVE_UPG'
CURRENTPHASE [MAIN_SHDRUN/SETUPGPAR_ISU_MAX_TAB_SIZE]
...started at 20160101123336
..finished at 20160101123336 with status SKIPPED.
# Phase RFCDEST_CREATE_S2O_PWD skipped due to condition(s) 'ITERATIVE_UPG'
CURRENTPHASE [MAIN_SHDRUN/RFCDEST_CREATE_S2O_PWD]
...started at 20160101123336
..finished at 20160101123336 with status SKIPPED.
# Phase RUN_UPG_RTO_BIG_TABLES skipped due to condition(s) 'ITERATIVE_UPG'
CURRENTPHASE [MAIN_SHDRUN/RUN_UPG_RTO_BIG_TABLES]
...started at 20160101123336
..finished at 20160101123336 with status SKIPPED.
CURRENTPHASE MAIN_SHDRUN/RUN_RSPTBFIL_INISHD
...started at 20160101123336
# Using phase log file 'RSPTBSHDIN_PH.LOG'.
...begin processing at 20160101123336
..times self: 0.000/0.000 usr/sys, children 0.000/0.000 usr/sys.
..finished at 20160101123548 with status FAILED.
# Error message set: 'RFC error system MD1 nr 02 function 'SUBST_START_REPORT_IN_BATCH' failed with code 5 key BATCH_SCHEDULING_FAILED: Number:000'
...begin dialog at 20160101123549
...end dialog at 20160101123811
..answered at 20160101123811.
-> decided to try again with "init".
CURRENTPHASE MAIN_SHDRUN/RUN_RSPTBFIL_INISHD
...started at 20160101123811
# Using phase log file 'RSPTBSHDIN_PH.LOG'.
...begin processing at 20160101123811
..times self: 0.000/0.010 usr/sys, children 0.000/0.000 usr/sys.
..finished at 20160101123929 with status FAILED.
# Error message set: 'RFC error system MD1 nr 02 function 'SUBST_START_REPORT_IN_BATCH' failed with code 3 key DBIF_REPO_SQL_ERROR: SQL error 2048 while accessing program CX_SY_OPEN_SQL_DB=============CP part SRC .'
...begin dialog at 20160101123931
...end dialog at 20160101125254
..answered at 20160101125254.
-> decided to try again with "init".
CURRENTPHASE MAIN_SHDRUN/RUN_RSPTBFIL_INISHD
...started at 20160101125254
# Using phase log file 'RSPTBSHDIN_PH.LOG'.
...begin processing at 20160101125254
..times self: 0.000/0.000 usr/sys, children 0.000/0.000 usr/sys.
..finished at 20160101125313 with status FAILED.
# Error message set: 'RFC error system MD1 nr 02 function 'SUBST_START_REPORT_IN_BATCH' failed with code 5 key BATCH_SCHEDULING_FAILED: Number:000'
...begin dialog at 20160101125314
...end dialog at 20160101144608
..answered at 20160101144608.
-> decided to try again with "init".
CURRENTPHASE MAIN_SHDRUN/RUN_RSPTBFIL_INISHD
...started at 20160101144608
# Using phase log file 'RSPTBSHDIN_PH.LOG'.
...begin processing at 20160101144608
..times self: 0.010/0.000 usr/sys, children 0.000/0.000 usr/sys.
..finished at 20160101144640 with status FAILED.
# Error message set: 'RFC error system MD1 nr 02 function 'SUBST_START_REPORT_IN_BATCH' failed with code 3 key DBIF_REPO_SQL_ERROR: SQL error 2048 while accessing program CX_SY_OPEN_SQL_DB=============CP part SRC .'
...begin dialog at 20160101144642
...end dialog at 20160101222737
..answered at 20160101222737.
-> decided to try again with "init".
CURRENTPHASE MAIN_SHDRUN/RUN_RSPTBFIL_INISHD
...started at 20160101222737
# Using phase log file 'RSPTBSHDIN_PH.LOG'.
...begin processing at 20160101222737
..times self: 0.000/0.000 usr/sys, children 0.000/0.000 usr/sys.
..finished at 20160101222753 with status FAILED.
# Error message set: 'RFC login to system MD1 ashost apmdgdevapp nr 02 gwhost apmdgdevapp gwservice sapgw02 failed with code 2 key RFC_LOGON_FAILURE: :00:162 DB-Error - 2048 '
...begin dialog at 20160101222754
...end dialog at 20160102114356
..answered at 20160102114356.
-> decided to try again with "init".
CURRENTPHASE MAIN_SHDRUN/RUN_RSPTBFIL_INISHD
...started at 20160102114356
# Using phase log file 'RSPTBSHDIN_PH.LOG'.
...begin processing at 20160102114356
..times self: 0.000/0.000 usr/sys, children 0.000/0.000 usr/sys.
..finished at 20160102114425 with status FAILED.
# Error message set: 'RFC login to system MD1 ashost apmdgdevapp nr 02 gwhost apmdgdevapp gwservice sapgw02 failed with code 2 key RFC_LOGON_FAILURE: :00:162 DB-Error - 2048 '
...begin dialog at 20160102114427
RSPTBHSDIN phase:
1 ETQ201 Entering upgrade-phase "MAIN_SHDRUN/RUN_RSPTBFIL_INISHD" ("20160102114356")
4 ETQ399 Set database connect to shadow.
4 ETQ399 Set environment for shadow connect:
4 ETQ399 Set RFC variables for shadow connect:
4 ETQ399 System-nr = '02', GwService = 'sapgw02' Client = '000'
4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ399 Requirement for tp maps to 'exe'
4 ETQ383 translates to path "/soft/sum/SUM/abap/exe"
4 ETQ399 Set tool parameters for shadow connect with TPPARAM 'SHADOW.TPP'.
2 ETQ366 Connect variables are set for shadow instance access
4 ETQ399 System-nr = '02', GwService = 'sapgw02' Client = '000'
4 ETQ399 Environment variables:
4 ETQ399 dbs_hdb_schema=SAPABAP1
4 ETQ399 auth_shadow_upgrade=1
1 ETQ200 Executing actual phase 'MAIN_SHDRUN/RUN_RSPTBFIL_INISHD'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'RSPTBFIL'
2 ETQ399 Arg[1] = 'SAP_INISHD=SAP_RSPTBFIL(ACTION=INI_SHD,LOGFILE=RSPTBSHDIN.$(SAPSID))'
2 ETQ399 Arg[2] = ''
2 ETQ399 Arg[3] = 'RSPTBSHDIN\.$(SAPSID)'
2 ETQ399 Arg[4] = '10'
2 ETQ399 Arg[5] = 'PUTTB_SHD destination filling'
1 ETQ399 Using error summary log 'RSPTBSHDIN_PH.ELG'.
1 ETQ399 Expanded phase arguments:
2 ETQ399 Arg[1] = 'SAP_INISHD=SAP_RSPTBFIL(ACTION=INI_SHD,LOGFILE=RSPTBSHDIN.MD1)'
2 ETQ399 Arg[3] = 'RSPTBSHDIN\.MD1'
4 ETQ265 Starting report "RSPTBFIL" with variant "SAP_INISHD=SAP_RSPTBFIL(ACTION=INI_SHD,LOGFILE=RSPTBSHDIN.MD1)" in batch
1 ETQ359 RFC Login to: System="MD1", AsHost="apmdgdevapp" Nr="02", GwHost="apmdgdevapp", GwService="sapgw02"
2EETQ231 RFC Login failed
4 ETQ010 Date & Time: 20160102114425
1EETQ399 Last error code set is: RFC login to system MD1 ashost apmdgdevapp nr 02 gwhost apmdgdevapp gwservice sapgw02 failed with code 2 key RFC_LOGON_FAILURE: :00:162 DB-Error - 2048
1EETQ203 Upgrade phase "RUN_RSPTBFIL_INISHD" aborted with errors ("20160102114425")
Thanks,
Srinivas
↧
Re: Geomap - Transform Property using CSS
Hi kish,
IE legacy versions don't support svg transform properties.
Thanks,
Nithyanandam
↧
Re: Upgrade issue PREP_EXTENSION/EHP_INCLUSION!
Hi Rahul.
Happy New year 2016
Check this SAP Note for your issue
1576955 - cannot create cofile during Upgrade/EHPI/SPAM
Regards
SS
↧
Re: IDoc to CSV on multiple folders based on field in IDoc
Hello Justin,
One IDOC to Mutliple Interfaces based on Werks, Since his Receiver his same.
↧
↧
Re: Adapter engine does not match adapter engine of integration flow
yes. it is not allowing to undeplpoy. throwing error.
"Adapter engine is not registered in the landscape"
↧
Re: can we use a loop statement in field routine
Thanks for your answers, My scenario wherein my basic requirement is to optimize the code. So, when i checked the existing code, in start routine we have internal table SOURCE_PACKAGE, Now in field routine XXX, they have put a select single statement based on country = country, matnr = matnr & date > sy-date. As, i need to optimize the code , i tried to write read statement on same internal table in field routine XXX, but read statement does'nt work with > expression. So i replaced it with loop statement with same conditions as it accepts > expression. Please clarify.
↧
Product XXX not serialized
Hi Experts,
I'm having this error Product XXX not serialized in Inbound delivery & Inbound delivery notification(Im using Serialization requirement at Inventory Level). I've referred another post Serializing Products in EWM but still not working for me. Appreciate your help. Thanks!
I've done following settings.
1) Product master have set Serial no. Profile (Z008).
2) Created Serial No. profile in EWM and ECC
3) Using SN Dec. WM and selected Q for queued and Serialized
Best Regards,
Jasvin
↧
Add Palestine Nationally in SAP R/3
Experts
We are using ECC6 and EHP 7 not able to find Palestine Nationally in SAP. How to add and to make it available in infotype 0002
Thanks in advance
↧
↧
Re: Deemed Export sale
Hi Amith,
Apart from the above configuration, do the following configurations:
1) Make the settings for ARE-3 Procedure under Deemed Exports
2) Maintain the CT3 license type(Quantity or Value based as required)
3) Configure the Credit/debit accts for ARE-3
4) Also, Specify GL accts for ARE-3 transaction.
5) Activate the required processing modes for J1IA301 under Transactions Configuration
6) Define the Reference Documents per Transaction
7) Lastly, create CT3 license and do the testing.
Best Regards
DS Rajan
↧
Re: Status Report In Appraisals
You can either use
1) the report RHHAP_DISPLAY_DB & then select the table Action log (HRHAP_ACT_LOG)
2) the function module HRHAP_DOC_ACT_LOG_READ. The appraisal document id should be inputted.
↧
Re: Parallel currency issue in New asset accounting
Hi Kishor,
Also check whether T093A & T093B tables updated with your Dep.Areas or not.
Regards
↧
More Pages to Explore .....
